Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2: TRAMPOLINE MAT & COVER ASSEMBLY
WARNING: 2 adults may be required to complete placement of all springs. Springs will create high levels of tension
when assembled. Please take care not to pinch your fingers.
4. Lay out the Jumping Mat(B) inside the frame.
5. Take Spring (D) and insert end 'b' into Top rail tube, then put end 'a' of the spring into trampoline Jumping
Mat(B) rings. Hold Spring Tool (G) overhand and pull spring hook towards Top rail (C) as picture shown; drop
hook into frame hole until it latches on completely, tap it down if hook is not completely in the hole.
6.
To even out the tension and avoid over stretching the springs, continue connecting every few springs by using
spring tool (G). Continue attaching the springs to your jumping mat in the above sequence
Publicidad
