Publicidad
Idiomas disponibles
Idiomas disponibles
RECORDING
FROM THE RADIO,
A CD OR CONNECTED
EQUIPMENT
DISPLAY
MD
REC
ENTER
II
MD MODE
Function
buttons
VOL/MULTl
JOG
1
2
3
4
5
6
7
Load a recordable MD into the disc drive with the
label side up and in the direction of the arrow.
Press one of the function buttons on the control
panel and prepare the source to be recorded.
.
To record from the radio, press the TUNER/BAND
button
and tune in to a station.
To record from equipment
connected
to the TAPE IN jacks,
press the TAPE/AUX
button
repeatedly
so that "TAPE"
is
displayed.
o To record from equipment
connected
to the AUX IN jacks,
press the TAPE/AUX
button
repeatedly
so that "AUX"
is
displayed.
. To record from a CD, press the CD button and load a CD,
Press the MD MODE button.
'"Mark MODE?"
is displayed
for 4 seconds.
Within
4 seconds,
press the ENTER
button.
Within 4 seconds, turn the VOL/MULTl JOG dial
to select an index mark mode.
To register index marks automatically
at the beginning
of each
track, select "Mk: AUTO?".
To register index marks every 5 minutes,
select "Mk: TIME?".
To record without
index marks, select "Mark: OFF?".
Within 4 seconds, press the ENTER button.
Press the MD REC button.
The
system
enters
the
standby
mode.
Wait
recordable
time on MD flashes on-the display.
until
the
8 Press the 11 button to start recording.
When recording
from connected
equipment,
start playback
of the connected
equipment.
To stop recording
Press the
button,
When recording
stops, "TOC Edit" is displayed
and the contents
(TOC) of the recording
are recorded
on the MD.
To
add index marks during recording
Press
the ENTER
button,
and an index
mark
is registered
regardless
of the index mark mode selected
at step 5.
To record on a previously
recorded MD
If there is an unrecorded
section left on the MD, the new recording
automatically
starts from where the previous
recording
finished.
If you want to start recording
from the beginning
of a previously
recorded
MD, erase the previous
recording
completely.
(See
page 26.)
To
change the display during recording
Press the DISPLAY
button.
With each press of the button, the
display changes
in the following
order.
[
o
Track number and elapsed
time on MD
(Example:
MD5Tr
1 :23)
@
Recordable
time on MD
(Example:
MD
-36:15)
@
Source
(Example:
FM
93.00 MHz)
20
ENGL/SH
Publicidad
