simatherm IH 045 Manual De Instrucciones página 32

If using TEMPERATURE MODE, insert the temperature probe(s) into the socket
on the left of the heater. Place the magnetic end of the probe on the inner ring
of the bearing or on the innermost part of the component. When operating
with two probes, place one probe on the inner ring and the other probe on
the outer ring of the bearing or workpiece. The order does not matter. Initialise
the heating process with the START/STOP key.
When the required temperature is reached, an acoustic signal will be heard.
Press the START/STOP button to switch off the unit, the bearing is automatical-
ly demagnetised.
32 Induction Heater IH 045 © simatec ag