Publicidad
Idiomas disponibles
Idiomas disponibles
Winding the bobbin
1
2
Concave portion
Convex portion
2
Take out the bobbin from the bobbin
case.
Snap in the latch to let the bobbin come out of the
bobbin case.
3
Thread the bobbin winder guide.
If the thread slips out of the bobbin winder guide,
pass it through the hole located under the bobbin
winder guide.
4
Installing the bobbin.
1 Pass the thread through the hole of the bobbin.
2 Adjust the convex portion of the bobbin thread
winding shaft to the concave portion of the
bobbin to set the bobbin.
3
3 Press the bobbin presser.
5
Start winding the bobbin.
6
Upon completion of winding the bobbin.
Return the bobbin presser on your side. Trim the
excessive thread and take out the bobbin.
13
Publicidad
