Worx WR206E Manual De Instrucciones página 14

MAINTENANCE
Your Landroid Vision, works hard and needs to be cleaned and checked from time to time. This section of our guide helps you
keep Landroid Vision in good shape so it can last for years without trouble. Here's how to take care of your Landroid Vision.
Switch off the machine before carrying out any service or maintenance.
1. Keep it sharp
Landroid Vision does not cut grass like other mowers. Its cutting blades are razor sharp on 2 edges and rotate in both directions
for maximum cutting capacity.
A. The blade turning disc makes a clockwise and counterclockwise rotation at random to use both cutting edges and minimize the
frequency of replacing the blades.
B. Each cutting blade will last up to 2 months when it is programmed to mow every day.
C. Always check to see if the blades are chipped or damaged and replace them if they are.
D. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your Landroid
Vision. Spare blades are also available at your nearest Landroid Vision retailer.
WARNING! Before cleaning, adjusting, or replacing the blades, turn your Landroid Vision OFF and remove
the battery. Always wear protective gloves.
1.1 Replacing the Blades
Remove the battery (See Fig. 1) and gently flip the Landroid Vision over (See Fig. 2).
Take the screws off the blades with a screwdriver (See Fig. 3 - Fig. 4).
Firmly screw on the new blades (See Fig. 5 - Fig. 6).
1
3
5
14
2
4
6
EN