Worx WR206E Manual De Instrucciones página 15

Attention: When fitting new blades, make sure you replace ALL the blades.
Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade turning disc. Failure
to use new screws could cause serious injury.
Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely.
2. Keep it clean
Your Landroid Vision should be cleaned regularly. This helps keep it in good conditions, especially removing dirt, debris and the
build-up of grass clippings from daily mowing. Turn Landroid Vision off before cleaning it. For extra safety, remove the battery.
Attention: Make sure the battery pack cover is closed when washing your Landroid Vision.
WARNING! YOUR Landroid Vision can only be washed by using a hose! DO NOT use high pressure washer
on your Landroid Vision. High pressure water can go inside the sealings and damage electronic and mecha-
nical parts.
2.1 Cleaning the upper body
A. Clean with a spray bottle filled with water. Don't use solvents or polishers.
B. Use a brush or a clean cloth to remove built-up dirt.
2.2 Cleaning the Bottom
A. Flip Landroid Vision upside down.
B. Remove debris and grass clippings using a brush to remove.
C. Be careful not to touch the blades with your hands. Wear gloves for protection.
D. Clean the blade disc, the chassis and the front wheel(s) thoroughly with a soft brush or moist rag.
E. Rotate the blade disc to ensure it rotates freely. Remove any obstructions. Remove any lodged debris so that they don't cause
a crack in the blade disk. Even the tiniest crack effects mowing performance.
F. Check the blades spin freely around the fixing screws. Remove any obstructions.
2.3 Cleaning the drive wheels
A. Remove mud from wheels with a brush in order to ensure good grip of the tread.
2.4 Cleaning the camera
A. We recommend that users regularly wipe the camera with a rag.
2.5 Clearing the charging contacts
A. Clean the contact pins located on the charging pile and the charging contacts located on the Landroid Vision using a cloth.
B. Periodically remove any build-up of grass clippings or debris around the contact pins and the charging strips to ensure Landroid
Vision successfully charges each time.
3. Keep it charged
The heart of Landroid Vision is its 20V Li-Ion Worx Powershare Battery.
A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place.
B. The recommended Landroid Vision operation temperature is between 0-55°C.
C. The life-span of Landroid Vision's battery depends on hours of usage and the length of use per day during the mowing season.
3.1 Landroid Vision can be charged manually
A. Connect the charging base to a suitable power supply. The green light on the charging base will turn on.
B. Manually dock Landroid Vision into the charging base while Landroid Vision is powered off.
C. The green light on the charging base will flash and Landroid Vision will begin to charge.
EN
15