Rohde PW 600 Instrucciones De Uso página 31

7.4. Cleaning the machine
⇒ It is best to clean the device immediately after each use or at least once a week.
⇒ Moisten the dried clay again and remove it with a cleaning cloth.
⇒ Remove clay residue with a slightly damp cleaning cloth.
⇒ Remove any other dirt on the device with a clean and dry cleaning cloth.
⇒ Do not use detergents or solvents.
⇒ Do not use compressed air.
⇒ Do not use a water jet (water hose or high-pressure cleaner).
⇒ Do not scrape off dried clay with metal objects. This will damage the device and may render it unusable.
8. Maintenance
8.1. General description
The roller drive and the devices for adjusting the roller height are low-maintenance. However, regular cleaning of the
slab roller is a basic requirement for long service life.
8.2. Maintenance intervals
Action
Visual inspection of the roller for damage (especially
foreign objects)
Visual inspection of the work surface for damage
(especially foreign objects)
Visual inspection of the linen cloth for damage
Visual inspection of the roller height adjustment
mechanism
Visual inspection of the roller mechanics (bearings, guide)
Visual inspection of the mechanics of the roller slide
(bearing, guide, chain, pinion, tightness of the screw
connections)
Checking the tightness of the large wheel handle screw
connection
Checking the tightness of the table leg screws
Visual inspection of the setting scale stickers
Maintenance by customer service
Replace the linen cloth (see Section 8.4)
Lubricate components (see Section 8.5)
Before/After
use
X
X
X
29 / 118 - EN -
Every 12 As
months required
X
X
X
X
X
X
X
X
X