Publicidad
1. New tine
2. Worn tine
3. Sharp edge
4. Hairpin clip
5. Retaining pin
Ground drive belt replacement
Take to an authorized dealer for repair.
Tine
replacement
A badly worn tine causes your tiller to work harder and dig
shallower. Most important, worn tines can not chop and shred
organic matter as effectively nor bury it as deeply as good
tines. A tine this worn (fig. 18) needs to be replaced.
Figure
18
Figure
19
To maintain the superb tilling performance fo this machine the
tines should be checked for sharpness,
wear and bending,
particulary the tines which are next to the transmission
(fig.
19). If the gap between the tines exceeds 3-1/2 inches, they
should be replaced or straightened as necessary.
New tines should be assembled as shown infigure 20. Sharp-
ened tine edges will rotate rearward from above (fig. 20).
CAUTION!
Never tamper with the engine governor, which is factory set
for proper engine speed.
tine
19
Tine
i
i
Tine
3-1/2"
max.
Figure 20
3
4
Counter tine
rotation
5
5O
Publicidad
