MTD 450 Serie Manual Del Operador página 6

Shredder
IMPORTANT
This unit is shipped
without gasoline or
oil in the engine. Be
certainto service
enginewith gasoline
and oil as instructed
in the separate engine
manual before operat-
ing your machine.
NOTE: All references
in this manual to the
left or right side of
the chipper shredder
is from the operating
i position only. Excep-
tions if any will be
specified.
NOTE: This Operators
i Manual covers a range
of product specifica-
tions for various
models. Characteristics
and featuresdiscussed
and/or illustrated in this
manual may not be ap-
plicable to all models.
MTD LLC reserves the
right to change product
specifications, designs
and equipment without
notice and without
=ncurringobligation.
Figure 3=1
IMPORTANT: T his unit is shippedwithoutgasolineor oil
in theengine.Be certainto serviceenginewith gasoline
and oil as instructedin the separateengine manual
beforeoperatingyour machine.
Loose Parts In Carton
a. HopperAssembly d. Bag
b. Chute Deflector e. SafetyGlasses
c. ChipperChute f. EngineOil
Attaching The Hopper
Assembly
1. a. Removesix hexnuts and washersfrom the weld
studson the impellerhousing.Donot removethe
supportplate. See Figure3-1.
b. Placehopperassemblyinto positionin front of
impellerhousing,aligningholesin hopperassembly
collarwith weldstuds.
c. Slide hopperassemblyontoweld studsand replace
washersand hex nuts.Donot tightencompletely.
2. a. Lift hopperassemblyup to impellerbracket
assembly.
b. Slide the releaserod out slightlyto hookthe hopper
bracketontothe rod.See Figure3-2.
c. Tightenthe six hexnuts that securehopper
assemblyto impellerhousingand alsotightenthe
hex nutsthat secure hopperbracketto hopper
assembly.
Figure 3-2
Figure 3-3
6