Section I1. Getting Read"/To Sew; Connecting Machine To Power Supply; For Your Safety; Operating Instructions - Sears Kenmore 385.16520000 Manual De Instrucciones

SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
(_ Power supply plug
(_) Power switch
Q Outlet
(_) Machine socket
(_) Machine plug
(_ Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power..
1o Turn off the power switch (_o
2. Insert the machine plug(_)into the machine socket (_,,
3o Insert the power supply plugOinto the outlet (_).
4o Turn the power switch (_)to turn on the power and
sewing light(_.
For Your Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
When attaching or removing any parts..
.-When cleaning the machine..
* Do not place anything on the foot control, when not
sewing..
Operating Instructions:
"For appliances with a polarized plug (one blade wider than
the other)., To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plugo If it still
does not fit, contact a qualified electrician to install the
power outlet. Do not modify the plug in any way._'
"Foot Controller Model YC-482J-1 or TJC-150 is used with
Sewing Machine Model 385.16520XXX._'
XXX - represents numbers 000 through 999.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
t
,, , ,, .... ,, ,,,,,,, ,,,,,,,,,,,,,,,,,,_
,Z
J
,,J
6