Tabla de contenido
Publicidad
To Drop or Raise the Feed Dogs
The drop feed dogs lever is located underneath the free
arm bed on the back side of the machine.
%qF')
To drop the feed dogs, push the lever in the direction
of the arrow as illustrated.
® To raise the feed dogs, push the lever in the direction
of the arrow as iIlustrated and turn the handwheel toward
you,, Feed dogs must be up for normal sewing.
1
®
1
L____ ./
®
Darning
O Stitch selector:
1
® Stitch width:
6.5
(_) Stitch length:
Any
@ Needle thread tension:
2 to 6
@ Pressure adjusting lever:
0
@ Presser foot A:
Zigzag foot
(_ Presser foot F:
Satin stitch foot
(_ Feed dogs:
Dropped
Drop the feed dogs.. Place fabric, with the hole in the center,
on an embroidery hoop, as shown_
Lower the presser foot F and sew at slow speed.
Move the fabric back and forth slowly until the darning area
is covered, Turn the fabric 1/4 turn (90") and sew another
layer of stitching over the first layer. After darning is
completed, return the pressure adjusting lever to 3 for
normal sewing.
NOTE;
1
If fabric is thin or badly damaged, use a separate piece of
fabric under the hole to reinforce it.
f
®
®
I
I
1
!
J
46
Publicidad
Tabla de contenido
