Publicidad
Idiomas disponibles
Idiomas disponibles
Operation of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
Remote control
SWING UP AND DOWN BUTTON
●
Press this button, to set up swing angle,
which circularly changes as below:
OFF
This is an universal use remote controller.
If remote controller sends the following
three kinds of status that the swing status
of main unit will be:
When the guide louver start to swing up and
down, if turn off the Swing, the air guide
louver will stop at current position.
which indicates the guide louver swings up
and down between that all five positions.
Names and functions of wireless remote control
TIMER ON
TIMER ON BUTTON
●
Timer On setting: Signal "ON" will blink
and display, signal
numerical section will become the timer
on setting status. During 5 seconds
blink, by pressing + or − button to adjust
the time value of numerical section,
every press of that button, the value will
be increased or decreased 1 minute.
Hold pressing + or − button, 2 seconds
later, it quickly change, the way of
change is: During the initial 2.5 seconds,
ten numbers change in the one place of
minute, then the one place is constant,
ten numbers change in the tens place
of minute at 2.5 seconds speed and
carry. During 5s blink, press the Timer
On button, the timer setting succeeds.
The Timer On has been set up, repress
the timer On button, the Timer On will
be canceled. Before setting the Timer,
please adjust the Clock to the current
actual time.
TIMER OFF
TIMER OFF BUTTON
●
Once press this key to enter into
TIMER OFF setup, in which case
the TIMER OFF icon will blink.
The method of setting is the same
as for TIMER ON.
– 25 –
will conceal, the
Publicidad
