› Output:
› Input:
› Total charging time:
› Starting current:
› Maximum current:
› Operating temperature:
User manual
Indicator
› Push the switch to check the battery charge level.
Indicator
1
Battery charge level
25%
Powerbank charging instructions
Fig. 1
› Plug the mains adapter (E) into a 230V mains socket.
› Connect the mains adapter to the 15V / 1A input port.
Fig. 2
› Plug the 12V charging adapter (F) into the vehicle 12V socket.
› Connect the 12V charging adapter to the 15V / 1A input port.
(Fig. 1)
5V 1A; 5V 2A; 12V 10 A; 19V 3,5A
15V 1A
8 hours (using the mains adapter)
300A
600A
-20 ºC ~ 60 ºC
2
3
4
50%
75%
100%
(Fig. 2)
› While the power bank is charging, the corresponding indicator
flashes according to the battery status. After charging the power
bank to 100%, all indicators go out.
Emergency starting of the vehicle
› Connect the jump starter adapter with clamps to the powerbank.
The device test is started and the LCD display shows the power-
bank voltage.
CLAMPS REVERSED
88.8
88.8
v
PRODUCT
v
BATTERY
888
A
888
%
JUMP START READY
› Connect the red terminal to the positive (+) pole of the battery,
connect the black terminal to the ground point according to the
vehicle user manual. The adapter tests the voltage and condition of
the vehicle battery and shows the data on the display.
+
CLAMPS REVERSED
88.8
88.8
PRODUCT
v
v
BATTERY
888
A
888
%
JUMP START READY
Follow the instructions on the LCD display.
› When JUMP START READY appears on the LCD display, it means
the connection is correct and the circuit is working. You can attempt
to start the engine.
EN
3