Descargar Imprimir esta página

Panasonic EW243 Instrucciones De Funcionamiento página 20

Ocultar thumbs Ver también para EW243:

Publicidad

Troubleshooting
Localization y solution de problemas
Display
Visualization
Status before error
Check points
Estado antes del error
Puntos de comprobacion
Pressurization to above 320 mmHg was
performed.
(Re-pressurization was performed several
times.)
Se realize un presionization a mas de 320
mmHg.
(La rcprcsionizacidn se realiz6 varias veces.)
The error indication
next to "Error" blinks
on the display
Pressure decreased suddenly and "E"
appeared in the display.
La presion disminuyo repeniinaniente y
aparecio "E" en la pantalla.
Check whether measurements
are being taken correctly and
the pressure cuff is attached to
your arm correctly.
(See page 10.)
La indication de error al
lado de "Error" parpadea
en la pamalla.
'ASTOLIC
mmHg
fifcl
1.1
PUL$E/min.
• Messumg
CO Low assay
The measurement process was performed
until 20 mmHg was reached and then the
error indication next to "Error" appeared in
the display.
El proceso de medida se realizo hasta
alcanzarse 20 mmHg y luego aparecio la
indication de error al lado de "Error" en la
pantalla.
Compruebe si las medidas estan
siendo tomadas correctamente y si
la banda de presion esta colocada
correctamente cn su brazo.
(Consulte la pagina 10.)
Pressurization to above 150 mmHg was
not performed.
No sc realizo la presionization a mas de 150
mmHg.
19

Publicidad

loading