Oki CX2731 Guia De Instalacion página 33

10 Use the down arrow key to select [Email
Setting] and press the right arrow key.
11 Referring to the Setup Form:
a) Server Address: Press the right arrow key,
then enter the information from line B-2.
b) Use the arrow keys to select [Enter], then
press .
<OK>
c) Your machine's email address: Press the
right arrow key, then enter the information
from line B-1.
d) Select [Enter], press
e) Authentication Method: Press the right
arrow key, then use the down arrow kwy
to select the method from line B-4.
f) Continue to follow the on-screen
instructions to enter the requested
information from section B of the Setup
Form.
g) When all the information has been
entered, "Email Setting was completed"
appears on the display, and the screen
returns to the Setup Menu.
12 When the setup menu screen appears, press
<OK>.
The setup for Scan To Email and Internet Fax is
complete.
For details on how to use Scan To Email and
Internet Fax, see the Basic User Guide on the
DVD supplied with your machine.
Set Up Scan To Network PC
The Scan To Network PC function enables you to
send and save scanned images to the "shared
folder" of a computer on the network. To use this
function, register your machine on the computer
as a user and create a shared folder, and then
create a profile on your machine to register the
settings for the computer.
• Before starting the setup, get permission from
the network administrator to create a shared
.
<OK>
33 - English
folder on the computer by following the
procedure below.
• The CIFS protocol is used in this procedure.
Check the Name of the
Computer
Check the name of the computer following the
procedure below, and fill it in on line C-1 of the
Setup Form.
Windows 7,
Windows Server 2008 R2,
Windows Server 2008
Windows Vista
Note
The procedure below uses Windows 7 as an
example. The display may differ depending on
the operating system.
1 Click [Start] > [Control Panel].
2 Select [System and Security].
For Windows Server 2008 and Windows Vista,
select [System and Maintenance].
3 Select [See the name of this computer] under
[System].
4 Note the name in [Computer name] on line
C-1 of the Setup Form.
5 Close the window.
Windows Server 2003
Windows XP
1 For Windows Server 2003, click [Start] >
[Control Panel] > [System].
For Windows XP, click [start] > [Control Panel]
> [Performance and Maintenance] >
[System].