Publicidad
Idiomas disponibles
Idiomas disponibles
12. CLEANING AND MAINTENANCE
Generally speaking, cleaning is the only form of
maintenance necessary.
Attention! Before you begin cleaning, disconnect the
appliance from the outlet. Disconnect the cord from the
outlet and turn off the appliance.
Warning! Do not use harsh detergents or abrasive
products and/or scrubbing pads and sponges and sharp
objects as they can stain and damage the appearance
of the appliance.
Warning! Never use a vacuum cleaner on the internal
parts of the appliance.
12.1 Front and Panel Commands
The use of a moist cloth is sufficient when cleaning the
appliance. In the event the appliance requires further
cleaning, add drops of detergent in the water. Dry the
appliance with a dry cloth. The steel front of the appliance
can be cleaned with products specifically designed for
steel. Such products prevent the formation of dirt on
the surface of the drawer. Apply a minimal amount of
the product on a soft and apply it to the surface of the
appliance.
12.2 Inside Space
To clean the inside space use a moist cloth. In the event
the appliance requires further cleaning add drops of
detergent to the water. Dry the surface with a dry cloth.
Make sure to avoid water draining into the ventilation
holes. Only use the appliance after the drawers are dry
completely.
Drawer slides
The drawer slides allow you to fully extend the drawer
for easier cleaning. If necessary, the drawer can be
removed.
ATTENTION: all operations for removal and reinsertion
must be performed by at least 2 persons.
NOTE: Load capacity for the drawer is 36 kg.
Remove all items from inside the warming drawer, and
allow the warming drawer to cool completely before
attempting to remove the drawer.
To Remove:
1. Open drawer to its fully open position.
2. Using a Phillips screwdriver, remove the screw
present under the right guide and the screw under the
left guide, as shown in the figure.
EN
EN
Drawer slides
The drawer slides allow you to fully extend the drawer for easier cleaning. If necessary, the drawer can be removed.
Drawer slides
ATTENTION: all operations for removal and reinsertion must be performed by at least 2 persons.
The drawer slides allow you to fully extend the drawer for easier cleaning. If necessary, the drawer can be removed.
NOTE: Load capacity for the drawer is 80 lbs (36 kg).
ATTENTION: all operations for removal and reinsertion must be performed by at least 2 persons.
Remove all items from inside the warming drawer, and allow the warming drawer to cool completely before attempting to
NOTE: Load capacity for the drawer is 80 lbs (36 kg).
remove the drawer.
Remove all items from inside the warming drawer, and allow the warming drawer to cool completely before attempting to
remove the drawer.
To Remove:
1. Open drawer to its fully open position.
To Remove:
2. Using a Phillips screwdriver, remove the screw present under the right guide and the screw under the left guide, as shown
1. Open drawer to its fully open position.
in the figure.
2. Using a Phillips screwdriver, remove the screw present under the right guide and the screw under the left guide, as shown
in the figure.
3. Hold the drawer by the sides (not by the front). Pull it
3. Hold the drawer by the sides (not by the front). Pull it slowly all the way out. Pull out the drawer horizontally and remove
it.
slowly all the way out. Pull out the drawer horizontally
3. Hold the drawer by the sides (not by the front). Pull it slowly all the way out. Pull out the drawer horizontally and remove
it.
and remove it.
4. Hold the drawer by the sides (not by the front). Pull it slowly all the way out.
4. Hold the drawer by the sides (not by the front). Pull it
4. Hold the drawer by the sides (not by the front). Pull it slowly all the way out.
6
slowly all the way out.
6
To Replace:
1. Manually extract the two sliding guides from inside
the drawer. Support the drawer, with one person on
one side and the other person on the other side.
Place the drawer on the extracted guides.
2. Holding the sliding guide steady with one hand, slide
the drawer inwards, until the rear pin engages.
To Replace:
1. Manually extract the two sliding guides from inside the drawer. Support the drawer, with one person on one side and the
other person on the other side. Place the drawer on the extracted guides.
3. Using a Phillips screwdriver, reinsert the two right and
2. Holding the sliding guide steady with one hand, slide the drawer inwards, until the rear pin engages.
left fixing screws under the guides.
3. Using a Phillips screwdriver, reinsert the two right and left fixing screws under the guides.
FIG. A
4. Push drawer in all the way.
4. Push drawer in all the way.
5. Gently open and close the drawer to ensure it is seated properly on the slices.
5. Gently open and close the drawer to ensure it is
seated properly on the slices.
Cleaning and Maintenance
Generally speaking, cleaning is the only form of maintenance
necessary.
ATTENTION
23
Before you begin cleaning, disconnect the appliance from
the outlet. Disconnect the cord from the outlet and turn off
the appliance.
WARNING
Do not use harsh detergents or abrasive products and/or
scrubbing pads and sponges and sharp objects as they
can stain and damage the appearance of the appliance.
Never use a vacuum cleaner on the internal parts of the
appliance.
GB
EN
Publicidad
