oklahoma joes TAHOMA 24203104 Guía De Montaje página 47

ERROR CODES
Error Error Title
Code
E01 Fan error
E04 Temperature
Sensor Error.
E05 Cooking
System
Overheat
Diplay Text Cause
FAN NoT dEt • The control system
cannot detect the fan
• A fan malfunction
tMP SnS Err • The control system
cannot detect the
temperature probe
• Temperature probe
malfunction
OVR tMp Err The controller detects
overheating for an ex-
tended period of time.
It could be due to:
• Grease fire inside the
unit
• Temperature probe
malfunction
Solution
1. Unplug the grill from the power.
2. Remove fan shroud and ensure all wires are not damaged
and connector is firmly connected.
3. Reassemble and retry.
If the error persists, please call Oklahoma Joe's customer
service for assistance.
1. Unplug the grill from the power.
2. Carefully remove rubber grommet and temperature sensor
connector from rear of control panel. Ensure all wires are
not damaged and connector is firmly connected.
3. Reassemble and retry.
If the error persists, please call Oklahoma Joe's customer
service for assistance.
If the controller detects a sharp overheat or overheats for an
extended period of time, it will turn off the fan and display E05.
In the case of excessive heat or fire- immediately close
the grill lid, unplug the grill from power and allow the grill to
completely cool.
Once the grill is cool:
1. Open ash pan and dump excess ashes.
2. Empty grease cup.
3. Inspect the left side of the cooking chamber for grease
cup. Inspect for any blockage and clean if necessary.
4. Reassemble and retry.
Frequently cleaning your grill will help prevent grease fires.
If the error persists, please call Oklahoma Joe's customer
service for assistance.
51
OK LAHO M AJ O ES. CO M