Publicidad
Idiomas disponibles
Idiomas disponibles
The Channel List function lets you skip the unnec-
essary channels from the Channel registration list.
1 Display the setup screen.
,, Press [SETUP].
The following setup screen is displayed.
2
Select "CHANNEl"
and press [ENTER] to con-
firm.
,, Using [A/T],
select "Channel List".
You can register remainder of channels that were
not scanned by the Autoscan function due to the
bad reception status at the initial setting.
® ® ®
® ® ®
® ® ®
® ® .........
1 Display the setup screen.
, Press [SETUP].
The following setup screen is displayed.
09
t_
z
C--
I.,--
uJ
09
...J
uJ
z
z
--r'
0
2
Select "CHANNEl"
and press [ENTER] to con-
firm.
,, Using [A/T],
select "Manual Register".
,, Press [ENTER].
3
Select the channel you want to skip.
,, Using [A/T],
select the channel.
,, Press [ENTER], and the highlight on the
selected channel disappears, then the channel
is set as skip. With [CH A/T],
you cannot
select the channel set as skip.
,, If you want to receive the skipped channel,
select your desired channel and press
[ENTER].
,, If you skip a major channel, you skip the minor
channels too.
NOTE:
* The channel with "DTV"indicated
on the display is ATSC,
otherwise
the channel is NTSC,
4 To exit the setup, press [SETUP].
,, Press [ENTER].
3
Select the channel you want to add.
,, Using Channel number
buttons, select your
desired channel.
,, Select "Register" with [ENTER].
4 To exit the setup, press [SETUP].
NOTES:
* tf the setup is completed
successfully.
"Registered
to the
channel list." is shown on the screen.
. If "Video1 "is being used set up will not be completed
suc-
cessfull_z "Unavailable"
will be shown on screen,
EN
Publicidad
