Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
To prevent vibration and noise, make sure the unit
is installed securely and firmly
Fence
Install the unit where the sunlight does not shine
directly on the unit.
Cooled air
i_.. _
"_ Heat
\\
° l_ _ ad
The outside of the cabinet must extend outward for
at least 12" and there should be no obstacles, such
J
as a fence or wall, within 20" from the back of the
-
condenser.Cabinet
because it will prevent heat radiation of the
il
t
.._
Abo_2r"20,,
,. _
Restriction of outside air will greatly reduce the
- -, . ...........
_..........
cooling efficiency of the air conditioner.
_lb
AUTION: All side louvers of the cabinet
must remain exposed
to the outside of the
structure.
Install the unit a little slanted so the back is slightly lower than the front (about 1/2").
This will force condensed water to flow to the outside.
Install the unit with the bottom about 30"~60" above the floor level.
: All supporting parts should be secured to firm wood, masonry, or metal.
• This unit is designed for installation in standard double
hung windows with actual opening widths from 29"
to 41".
• The top and bottom window sash must open sufficiently
to allow a clear vertical opening of 18" from the bottom
of the upper sash to the window stool.
Interior wall
"- ....
÷
29" min.
I
(Without frame curtain)
J
Sash
j
Window
_0ffset
12
Room Air Conditioner
Publicidad
