Publicidad
Idiomas disponibles
Idiomas disponibles
4-PRELIMINARY INFORMATION ON THE MACHINE
4.1
GENERAL DESCRIPTION OF THE MACHINE
Automatic case sealer with top and bottom drive belts and automatic adjustment to the box size to be sealed.
4.2
TECHNICAL SPECIFICATIONS
- Production = 650 boxes/hour (average)
- Standard power supply = 230/400 V 50Hz 3Ph
- N.2 motors (HP 0,18) KW 0,12
- Taping units K12, tape width 75 mm.
- Weight = 165 kg.
- Belts speed = 22 m per minute
- Compressed air = 6 Bar max.
4.3
TAPE DIMENSIONS
Suitable adhesive tapes:
PVC
OPP
ADHESIVE PAPER
4.4
PURPOSE OF THE MACHINE
The machine is designed to seal with adhesive tape cases having the dimensions (in millime-
ters) shown in section 4.5, by applying two tape stripes on their top and bottom flaps simul-
taneously.
4.5
BOX-SIZE RANGE
The case sealer SR46-S is automatically adjustable to any box sizes included in the range
shown below (part 1).
To seal boxes higher than 750 mm, it is possible to modify the position of the outer columns
as shown in the drawing below (part 2).
NOTES
The box length (L) refers to the size in the seal direction.
l
The boxes should have a H/L ratio (HEIGHT/LENGTH) of 0,5 or higher.
l
Boxes with a lower ratio should be test run to ensure perfect performance, which depends upon various factors such as box weight
and rigidity.
Some special modifications are available from the manufacturer in order to seal box formats smaller or larger than the standard sizes
l
described herein. If interested, please contact your Siat Service Dealer
ENGLISH
1
OUTER COLUMNS IN LOW POSITION
BOX SIZE
2
OUTER COLUMN IN HIGH POSITION
BOZ SIZE
68
A
A = 410 mm max
B = 75 mm
C = 76 mm
h
w
MIN
MAX
L
150
W
170
650
H
130
750
MIN
MAX
L
150
W
170
650
H
340
930
C
B
l
January 2007
Publicidad
