Publicidad
Idiomas disponibles
Idiomas disponibles
11-SET-UP AND ADJUSTMENTS
SPECIAL ADJUSTMENTS
11.10 CHANGE OF THE TAPE LEG LENGTH
The tape leg length can vary from 70 to 50 to 30 mm. To adjust the tape leg
length refer to the manual of the K12 taping unit, supplied with the machine.
11.11 OUTER COLUMNS IN HIGH POSITION
To seal boxes higher than 750 mm it is necessary to raise
the outer columns as follows:
Activate the pneumatic circuit rotating anti-clockwise the
knob 1 and lift the upper unit rotating clockwise the selec-
tor 2.
Insert under the upper head assembly a strong case or
wooden box, rigid enough to support 45 kg, and approxi-
mately 450 mm high. Turn counter-clockwise the selector
2 so that the upper unit leans on the support.
Release the upper head stop and move it fully down.
Cut the air pressure, rotating the knob clockwise.
Remove the air circuit cap. So that all the air in the circuit comes out.
Put the cap again in place.
ENGLISH
1
2
88
2
412.23bis
January 2007
Publicidad
