Publicidad
Idiomas disponibles
Idiomas disponibles
7-INSTALLATION
7.9
PNEUMATIC CONNECTION
Connect a 8 mm diameter hose to the plug and fix it by the supplied
clamp.
.
Activate the pneumatic circuit by turning counterclock-wise knob 1 and
raise the upper head by turning clockwise selector 2. Remove the po-
lystyrene blocks.
7.10 POSITIONING OF THE SIDE GUIDES
Mount the side guides on the centering levers as shown on Picture.
7.11 PRELIMINARY ELECTRIC CHECK-OUT
Before connecting the machine to the mains please carry out the following operations:
7.11.1 Make sure that the socket is provided with a ground protection circuit and that both the mains voltage and the
frequency match the specifications on the machine plate.
7.11.2 Check that the connection of the machine to the mains meets the safety regulations in your country.
7.11.3 The machine is fitted with a main switch having a maximum breaking power of 6 kA and a short-circuit breaker
pre-set at 120 A.
The user will be responsible of testing the short-circuit current in its facility and should check that the short-circuit
amperage setting on the main switch of the machine is compatible with all the components of the mains system.
January 2007
77
1
2
ENGLISH
Publicidad
