Oase Bitron Eco Serie Puesta En Marcha página 20

Control system overview
1 Operating
mode
2 Button
3 UVC lamp sta-
tus display
4 Display
20
Four operating modes for irradiation of algae and germs as required (→ Selecting the
operating mode)
• LEDs indicate the selected operating mode.
• LED is lit blue: UVC lamps are switched on.
• LED is lit green: UVC lamps are switched off.
Functions
• Switch on / switch off the unit(→ Switching ON/OFF)
• Selecting the operating mode (→ Selecting the operating mode)
• Checking the remaining operating life of the UVC lamps
• Resetting the operating hour counter
LED bar for indicating the remaining operating life:
• Four LEDs lit: 9001 ... 12000 hours
• Three LEDs lit: 6001 ... 9000 hours
• Two LEDs lit: 3001 ... 6000 hours
• One LED lit: 1 ... 3000 hours
• One LED flashing: Replace UVC lamps.
• All LEDs unlit: At least one UVC lamp is defective.
Display of the operating status:
• Display of the current water temperature in °C
• Display of System messages
• Display of the residual operating life of the UVC lamps
BTN0007