SHERCO 250 SEF RACING Manual Del Usuario página 117

CHASSIS MAINTENANCE
ADJUSTING THE STEERING HEAD BEARING PLAY
3 2
CLEANING THE CHAIN
CHECKING THE CHAIN TENSION
Place the motorcycle on a suitable stand.
Loosen screws
1
Loosen or tighten the nut
bearing play.
1
Steering nut
Tighten the screws
Screw top triple clamp
Screw bottom triple clamp
Tighten the screws
Steering column
clamp screw
Check the play of the steering head bearings. (& p.116).
Remove the bike from the stand.
NOTE
The bearings should be greased at least once a year with a good
quality grease.
Regularly cleaning the chain considerably increases
its service life.
Clean the chain and apply chain lubricant.
Chain Cleaner
Chain grease
Place the motorcycle on a suitable stand.
Push the chain up and measure the chain movement
as shown in the diagram.
Chain tension
If the chain tension is not correct, see how to adjust
the chain (& p.118).
Otherwise, remove the bike from the stand.
and .
1 2
to adjust the steering
3
M20
.
1
M8x35
M8x35
.
2
M8x30 25Nm
®
Motul C1 Chain clean
®
Motul C3 Chain Lub Off Road
50mm...53mm
30Nm
17Nm
12Nm
Loctite ®
243™
117