SHERCO 250 SEF RACING Manual Del Usuario página 121

WHEELS, TIRES
REMOVING THE FRONT WHEEL
REINSTALLING THE FRONT WHEEL
1
1
2
3
2 4
Place the motorcycle on a suitable stand.
Remove the two screws
1
Loosen the two screws
3
Pull the axle through the right side.
Remove the wheel from the fork.
WARNING
Do not operate the front brake lever when the front wheel is
removed.
Check if the brake disc is not dirty or contaminated with
oil or grease. If it is, clean the disc with brake cleaner.
Brake cleaner
Fit the spacer on left side of the hub, as well as
1
right side.
Install the front wheel in the fork and install the axle
(grease the axle prior to installation).
Tighten one of the fork leg screws
Fork screws
Install and tighten the axle nut
Front wheel axle nut
Tighten the two screws
2
leg screw.
Fork leg screws
Operate the front brake lever several times until the
brake pads touch the disc.
Remove the motorcycle from the stand and push in
the fork several times.
Tighten the 2 screws on the right fork leg.
3
and the nut .
2
.
Motul ® P2 Brake Clean
on the right side.
3
M8 20Nm
.
4
M20 60Nm
, loosen the right side fork
M8 20Nm
121