Publicidad
2. BEFORE THE FIRST USE
1. Remove the water tank (6). Take it from the handle (8) and pull it out.
2. Wash the water tank under the tap.
3. Fill the water tank. Never fill beyond the level for maximum filling (MAX)!
4. Insert the water tank into the coffee maker. Make sure it is fitted correctly.
5. Plug the coffee maker to the mains.
6. Place a container underneath the coffee and steam outlet nozzles. Height of coffee
outlet nozzles can be adjusted moving them upwards and downwards.
7. Touch the Power (a) button to switch the coffee maker on.
8. Indicators of the icons will light up and go off alternatively. After a time, water will start
flowing out through the nozzles.
NOTE: During first use, the machine could detect that there is air in the system by illumi-
nating the warning indicator (l) and the hot water button (e). Press the hot water button
to start the system air extraction process.
9. Once the rinsing process has finished, all the indicators will light up permanently.
10. Remove the container placed underneath the nozzles and empty it. Never drink water
collected after rinsing process!
11. After rinsing, the coffee maker is ready to be used.
Notes:
- Automatic rinsing process will be carried out each time the coffee maker is plugged in
to the mains, or when the coffee maker has cooled down after having prepared a drink
Duration may vary depending on the temperature of the system. Starting from cold, du-
ration is about 45 seconds.
- The coffee maker is tested at the factory using coffee and water. Although the unit has
been carefully cleaned, it is possible that some water and coffee residues remain. It is
recommended to carry out this rinsing process several times before first use.
54
Publicidad
