GE PGP990 Manual Del Usuario página 30

LP Conversion
Instructions
Gas Cooktop
I Questions? Cell 800.GE.CARES (800.432.2737) or visit
our
Website at:ge.com I
BEFORE YOU BEGIN
Read these instructions completelg and carefullg.
IMPORTANT - Save these
instructions for local inspector's use.
• IMPORTANT - Observe
all
governing codes and ordinances.
• Note to Installer
- Be sureto leavethese
instructions with the Consumer.
• Note to Consumer - Keep
these
instructions for future reference.
• This cooktop is factory set for natural gas operation.
Conversion to LPoperation should be performed
by a qualified technician or installer. Keep these
instructions for future reference. When converting
to LP,save the original parts for possible future use.
• Product failure due to improper installation is not
covered under the GEAppliance Warranty.
FOR YOUR SAFETY:
WAR N ING
- if you areusing LP(bottled) gas,
all a djustments described in thefollowing steps mustbe
made before attempting burner adjustments oruseof
thecooktop.
WARNING
- Thisconversion kit shall b e
installed by o qualified service agency inaccordance
withthemanufacturer's instructions and all applicable
codesand requirements oftheauthority having
jurisdiction. If theinformation in these instructions
is not followed exactly, a fire, explosion or production
of carbon monoxide may result, causing property
damage, personal injury or loss of life. The qualified
service agency is responsible for the proper installation
of this kit. The installation is not proper and complete
until the operation of the converted appliance is checked
as specified in the manufacturer's instructions supplied
with the kit.
TOOLS YOU WILL NEED
Adjustable wrench
Small, thin-blade flat screwdriver with approximatelg
1/8"
blade width is needed to access the calibration screw.
PARTS INCLUDED
PART QUANTITY
Brass orifices 4
Q
Stick-on conversion label 1
3O