Item
RCKT-90/70-O
Art. No
1451
Rated input power
250 W
Rated current
1,7 A
Power consumption
4,5 kWh / 24 h
Refrigerant
R134a (200 g)
Work temperature
Rated frequency:
Rated voltage
Volume
300 L
Temperature
Electric shock protec-
tion class
10. REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If there is any damage,
please stop using the device. Please contact your customer service to solve the prob-
lem.
What to do in case of a problem?
Please contact your customer service and prepare following information:
•
Invoice number and serial number (the latter is to be found on the technical
plate on the device).
•
If relevant, a picture of the damaged, broken or defective part.
11. TROUBLESHOOTING
Fault
Probable Cause
The appliance is
The unit is not switched on
not working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
28
RCKT-90/70-S
RCKT-202/80-VG
1452
1456
250 W
260 W
1,7 A
1,7 A
4,5 kWh / 24 h
2,2 kWh / 24 h
R134a (200 g)
R134a (350 g)
From 10⁰C to 32⁰C
50 Hz
230 V
300 L
485 L
From 0⁰C to +10⁰C
I
Action
Check the unit is plugged in
correctly and switched on
Call your agent or qualified
technician
Replace the fuse (UK plug)
Check power supply
Call your agent or qualified
technician
Fault
Probable Cause
The appliance
Too much ice on the eva-
turns on, but the
porator
temperature is
Condenser blocked with
too high/ low
dust
Appliance is located near
a heat source or air flow
to the condenser is being
interrupted
Ambient temperature is
too high
Unsuitable foodstuffs are
being stored in the appli-
ance
Doors are not shut pro-
perly
Appliance is overloaded
The appliance is
Loose nut/screw
unusually loud
The appliance has not been
installed in a level or stable
position
The appliance is
The appliance is not pro-
leaking water
perly levelled
The discharge outlet is
blocked
Movement of water to the
drain is obstructed
The water container is
damaged
The drip tray is overflowing Empty the drip tray with sponge
Action
Defrost the appliance
Call your agent or qualified
technician
Move the refrigerator to a more
suitable location
Increase ventilation or move
appliance to a cooler position
Remove any excessive hot food-
stuffs or blockages to the fan
Check doors are shut and seals
are not damaged
Reduce the amount of food
stored in the appliance
Check and tighten all nuts and
screws
Check installation position and
change if necessary
Adjust the screw feet to level the
appliance (if applicable)
Clear the discharge outlet
Clear the floor of the appliance
(if applicable)
Call your agent or qualified
Technician
29