10.
Insert screws in hinge holes on
dryer cabinet
NOTE: two people may be needed to reinstall door.
Insert screws into the bottom holes on left side of dryer
cabinet. Tighten screws halfway. Position door so large end of
door hinge slot is over screws. Slide door up so screws are in
bottom of slots. Tighten screws. Insert and tighten top screws
in hinges.
11.
Check door strike alignment
Close door and check that door strike aligns with door catch.
If it is needed, slide door catch left or right within slot to
adjust alignment.
TROUBLESHOOTING
See the "Use and Care Guide" to possibly avoid the cost of a
service call.
17