Publicidad
Idiomas disponibles
Idiomas disponibles
During the cooking process, you can pause the cooking by pressing the
key or
cancel it by pressing the - key.
Note : If you open the appliance door during an ongoing operation, the operation
will be paused.
Please be especially careful with the risk of burns. Do not cover the ventilation slots
otherwise, the appliance may overheat. To cool down your oven quicker after the
operation, the cooling fan may continue to run for a period afterward .
Set a cooking time : Once selected your cooking function and the temperature you
can enter a cooking time for your dish.
Press the
key and turn the right knob to adjust your cooking time. Then press the
strat key
to launch your cooking. Once your cooking is completed the oven will
beep and switch off automatically .
Set a delayed start cooking : Set a cooking mode and a cooking time, then press on
the delay departure key - .
The clock hour will blink ; adjust the hour of your cooking end time and confirm by
pressing the delay departure key; minutes will then blink adjust it in the same way, and
confirm by pressing the start key.
In the display the delay departure symbol will be switched on blinking . The oven will
start automatically and will switched off once your cooking time is completed.
Note : While your oven is operating, you can change the heating type setting and
temperature setting by oven cooking mode selection or temperature/time setting
knob. After the change, with no other action and after 6 seconds the oven will apply
new settings.
For modifying cooking duration time during the cooking process, please press
-
key, time display will blink; adjust to requested time with the right knob. With no action
the new setting will be validated after 6 seconds. If you set a delay start cooking,
you cannot do any change.
If you want to cancel the cooking process, press - key.
2.4 Cooking with the accessories
2.4.1 Meat probe (depending on model)
Adjust the oven rack so that the food will be evenly spaced between the upper and
lower baking elements.
Insert the probe all the way into the meat until the ring at the end of the probe
touches the meat.
Insert the probe's plug into the outlet on the oven's interior wall .
The control panel will switch to the meat probe mode automatically .
Publicidad
