Publicidad
MAINTENANCE
Cleaning and Care
Empty the water container
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
！
Warning!
• Empty the water container after each use. Once the water container is filled
completely, the programme will be paused and the "Full" icon will light.
After the container is emptied, the dryer can be restarted by pressing
【Start/Pause】button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Clean the lint filter
1. Open the door.
2. Take out the filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in water.
4. Dry the filter thoroughly before
installing it back.
Note!
The lint accumulated on the filter will block the air circulation, which will
•
cause the extension of drying time and increase energy consumption. Therefore
the lint filter shall be cleaned after each use.
Take notice of the correct orientation before to insert the lint filter.
•
Do not operate the dryer without the lint filter!
•
Clean the lint filter after each use to prevent lint accumulation inside the dryer.
•
20
Publicidad
