Publicidad
Idiomas disponibles
Idiomas disponibles
In case the machine didn't work properly, you should address to an authorised seller or distributor,
so it can be repaired.
Note: Within the warranty period it is strictly forbidden the reparation, manipulation or modification
in machines by the user or any unauthorised person. In case it happens, warranty will expire
immediately.
Even there's little maintenance in these kind of machines, there are some recommendations you
should follow.
a) Keep the machine's environment clean.
b) Clean the dust off the machine with a rag moistened in alcohol, never in water.
c) Before storing away the machine, just remove the collet chuck as explained in point 6 in the
previous page. You should dust off with a brush both the collet chuck and the pieces that
remain uncovered.
d) It's also advisable to grease the inner part from the opening system, once cleaned the collet
chuck as we saw in the point above. First, you must grease the chuck clamping system. Then,
just holding the micromotor upright, proceed to grease it with 3 or 4 drops of SAE 10 oil or
similar within the shaft. You should try that oil comes inside the machine.
You should repeat this process approximately every 50 working hours.
Possible faults and their solution
Equipment's maintenance
18
Publicidad
