VALBERG GLIDE-R1 Instrucciones De Uso página 23

B
Product usage
• Always iron clothes that require the lowest temperature first. Then continue with clothes
that require a higher temperature. The iron heats up much faster than it cools down.
• Silk, dark fabrics and wool are prone to shiny marks and burn easily. Turn delicate garments
inside out before ironing them and place a damp cloth between the garment and the iron
for added protection.
• We recommended ironing fabrics with special finishes (shiny fabrics, pleated details or
contrasts, etc.) at low temperature.
• If the garment consists of multiple fabrics, always use the correct temperature setting
for the fabric that requires the lowest ironing temperature. For example, if a garment is
made of 60% polyester and 40% cotton, use a temperature suitable for polyester and do
not use the steam function.
Connecting/disconnecting the unit
Before plugging in or unplugging the iron, always turn the temperature control knob
anticlockwise to "MIN" and set the steam control knob to the
Filling the tank
Fill the water tank whenever you are planning to use the steam ironing function or the spray
button. This iron has been designed for use with tap water. However, if the water in your area
is hard, we recommend using distilled water instead.
1. Make sure the iron has been unplugged from the mains socket.
2. Set the steam control knob to
3. To open the water tank lid, gently pull the tab located on the side of the lid.
4. Use the supplied measuring cup to fill the water tank with tap water up to the "MAX" level
mark. Do not exceed the "MAX" level mark.
5. Close the tank lid.
Important: Do not add starch, perfumes, descalers or chemical additives to the
water tank, as this may damage the iron. Do not use chemically softened water,
as this could cause the iron to leak or splash water.
Dry ironing
1. Connect the power cable to a suitable mains socket.
2. In order to dry iron, set the steam control knob to
steam burst button.
.
21 EN
position.
and refrain from pressing the