Publicidad
30.8.2023
4. Quick start instructions
Make sure you have all the provided equipment (ADX-31-U Amplifier, Power Supply,
Power cord).
1. Connect a Panphonics speaker model with a speakON™ connector to the amplifier
speaker output (15).
2. Connect a media source or a POE supply to a suitable amplifier input:
•
Dante input (13) or
•
XLR input (14).
If POE is used as a power source, skip to step 6.
3. Connect the power cord to the power supply.
4. Connect the power supply to the amplifier (12).
Always connect all necessary cables to the amplifier before you connect the
power source to a power outlet.
5. Connect the power cord to a power outlet.
6. Press the PWR (1) button to turn on the amplifier.
The power indicator (2) light comes on.
7. Choose the applicable input channel with the input channel dial (9) with the indicator
lights:
•
XLR channel indicator (10) or
•
Dante channel indicator (11).
8. Make sure the media source is at an applicable level to prevent distortion or excess
noise to the amplifier input.
9. Adjust the amplifier output volume to the correct level with the VOL (6) and VOL (7)
buttons.
For instructions on how to install the Panphonics Device Control software, see Chapter 6
Software, page 13.
Revision 1.2
Manual
DANGER
v.1.2/08-23
9
Publicidad
