VALBERG UF NF 274 E X742C Instrucciones De Uso página 21

B
FREEZER: temperature control of the appliance available only for user defined mode
Touching "FREEZER" button consecutively, the temperature will change in a circle from
-14°C~-22°C, stop touching and after 5 seconds flashing, temperature is set.
Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C)
Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C)
Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C)
SUPER: select and deselect super mode
• Press "SUPER" button to select super mode. After 5 seconds flashing of super mode icon,
super mode is selected.
• When super mode is selected, super mode icon will light on, and display window will show
-25°C. In super mode, touching "FREEZER" button, super mode icon will flash 3 times, but
freezer temperature can not be changed.
• To exit Super mode,
- Press "SUPER" button to deselect Super mode,
- Or after 50 hours of super mode without any operation, the refrigerator willautomatically
stop it and enter to previous setting.
WARNING:
In super mode, noise of the appliance may be slightly higher
than normal running.
ALARM/ECO: clear door opening alarm and high temperature alarm, select and deselect
ECO mode
• Short touching "ALARM/ECO" button to clear door opening alarm and high temperature
alarm. Touching "ALARM/ECO" button for 3 seconds to select ECO mode. After 5 seconds
flashing of ECO mode icon, ECO mode is selected.
• When ECO mode is selected, ECO mode icon will light on, and display window will show
different preset temperatures, depending on the ambient temperature (Ta) of where the
appliance be placed, as below.
Using the appliance
14 EN
-18°C
-18°C
-18°C