MIRKA 1230 M Instrucciones De Manejo página 84

en
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
2. Risks
2.1 Electrical components
DANGER
The upper section of the machine contains live components. Contact with live components
leads to serious or even fatal injuries. Never spray water on to the upper section of the
machine.
DANGER
Electric shock due to faulty mains connecting lead. Touching a faulty mains connecting
lead can result in serious or even fatal injuries.
• Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).
• Regularly check whether the power cord is damaged or shows signs of ageing.
• If the electric cable is damaged, it must be replaced by an authorized Mirka distributor
or similar qualified person in order to avoid a hazard.
• In no circumstances should the power supply cord be wrapped around fingers or any
part of the operator.
2.2 Hazardous dust
WARNING
Hazardous materials. Vacuuming up hazardous materials can lead to serious or even fatal
injuries. The following materials must not be picked up by the machine:
• hot materials (burning cigarettes, hot ash, etc.)
• flammable, explosive, corrosive liquids (e.g. petrol, solvents, acids, alkalis, etc.)
• flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)
2.3 Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes and accessories can impair the safety and/or function of the appliance .
Only use original spare parts and accessories from Mirka . Spare parts that can affect the health and safety of the
operator and/or function of the appliance, are specified below .
84
Mirka® Dust Extractor • 1230M & 1242 M • 230 V / 100–120 V • PC & AFC