cecotec CONGA 7490 IMMORTAL HOME Manual De Instrucciones página 55

to the self-emptying base, save both complete and incomplete maps, and, once recharged,
it will resume cleaning where it left off until the entire cleaning surface has been mapped.
The robot vacuum cleaner is constantly mapping, so it adapts in an individualised and
personalised way to the particularities of each house while constantly improving its map.
Information on the self-emptying base
- The self-emptying base includes a loading and emptying function and a new dirt-
disposal bag. After cleaning, the robot will automatically return to the self-emptying
base to recharge. The self-emptying base will empty the dirt tank based on the emptying
scheduled selected on the app.
If the robot vacuum cleaner is charging on the self-emptying base, you can force the robot to
-
self-empty. Press the Back Home button for the self-emptying base to empty the dirt tank.
3. OPERATION
Robot vacuum cleaner's buttons
Auto Mode
- Press the Start/Pause button on the robot vacuum cleaner or select it in the app to make it
start cleaning automatically in Edge mode and then perform a cleaning cycle in an orderly
zigzag pattern while it also recognises which areas have been cleaned and which have
not. The robot vacuum cleaner will automatically plan the cleaning route during cleaning.
If you control the robot vacuum cleaner manually during this mode, the robot will
-
recalculate the route, so it may pass through already cleaned areas. To ensure efficient
cleaning, do not operate the robot vacuum cleaner manually during automatic cleaning.
Thanks to its Total Surface 2.0 technology, if the battery is low during the cleaning cycle,
-
the robot vacuum cleaner will smartly return to the charging base automatically and, once
fully charged, it will resume the cleaning process from the same point.
During cleaning, the robot vacuum cleaner will stop briefly to evaluate the area and
-
calculate the cleaning route (this stop will vary depending on the house conditions).
Back Home mode
- Press the Back Home button on the robot vacuum cleaner or from the app to send the robot
vacuum cleaner to the self-emptying base. The robot vacuum cleaner will stop vacuuming
until it reaches the base.
- This mode can be activated during any cleaning cycle.
The robot vacuum cleaner will take the shortest route back to the self-emptying base
-
thanks to its map-memorisation feature and the smart Back Home function.
- Upon completing a cleaning cycle or when the battery is low, thanks to its Total Surface 2.0
technology, the robot vacuum cleaner will automatically return to the self-emptying base
CONGA 7490 IMMORTAL HOME X-TREME
ENGLISH
55