cecotec CONGA 7490 IMMORTAL HOME Manual De Instrucciones página 59

Map Editing function
This function allows you to edit generated maps: rename cleaning areas, split or combine
areas, and edit cleaning mode, suction power, and scrubbing level in each selected area.
Robot vacuum cleaner's Location function
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Cleaning the main brush
The main brush rotates at high speed and helps pushing the dirt into the suction mouth. This
brush is in contact with the floor, and therefore with dirt, so it can wear out overtime, negatively
affecting cleaning efficiency. For this reason, it is suggested to replace the main brush after a
maximum of 320 hours or less.
1. Slightly press the main brush frame's tabs to open the main brush compartment and
remove it. Fig. 11
2. Remove hair, lint, and other dirt trapped in the brush and around the shafts with the help
of the self-cleaning brush. Fig. 12
3. Clear and clean the robot vacuum cleaner's suction channel.
4. Reinstall the main brush and its frame.
Recommendation
It is recommended to clean the main brush once a week with the help of the self-cleaning
brush.
Side brush. Fig. 13
The side brush is designed with many bristles that push dirt into the suction mouth and
thoroughly clean edges and corners. This brush may wear out overtime, which will negatively
affect cleaning efficiency.
Recommendation
It is recommended to clean the side brush once a week with the help of the self-cleaning
-
brush.
Remove the side brush by pulling it outwards and clean it regularly.
-
Recommendation
To ensure perfect cleaning, it is recommended to change the side brush every 3 months
(depending on frequency and type of use).
CONGA 7490 IMMORTAL HOME X-TREME
ENGLISH
59