Descargar Imprimir esta página

cecotec CONGA 7490 IMMORTAL HOME Manual De Instrucciones página 62

Ocultar thumbs Ver también para CONGA 7490 IMMORTAL HOME:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
ENGLISH
The robot vacuum
cleaner does not work
properly.
The robot vacuum
cleaner makes a
strange noise during
operation.
The robot vacuum
cleaner does not
clean efficiently or
doesn't pick up all the
dirt.
The robot vacuum
cleaner could not
connect to the Wi-Fi
network.
The robot vacuum
cleaner did not carry
out the scheduled
cleaning task.
The robot vacuum
cleaner does not
return to the self-
emptying base
after finishing Spot
cleaning or changing
the starting position.
62
CONGA 7490 IMMORTAL HOME X-TREME
Turn off the robot vacuum cleaner and turn it on again.
Reset the robot vacuum cleaner by pressing the side Reset
button.
The main brush, side brush, or omnidirectional wheel are blocked
or tangled. Stop the robot vacuum cleaner and clean them.
The tank is full. Empty it and clear the high-efficiency filter if it is
blocked.
The high-efficiency filter is blocked. Clean it.
The main brush is blocked or tangled. Clean it.
Bad Wi-Fi signal. Check that the robot vacuum cleaner is located
in an area with good Wi-Fi signal.
The Wi-Fi connection is unstable. Reset the router, check if there
are any App updates, and try again. This robot vacuum cleaner
only supports the 2.4 GHz band.
Make sure that your device mobile data are disabled to improve
the linking process.
Check if the robot vacuum cleaner is in Sleep mode and change
mode. This option can be found on the general settings of the
robot vacuum cleaner and allows you to define time slots in
which the robot will not perform the scheduled cleaning tasks
when in Sleep mode. 
Ensure proper connection of the robot vacuum cleaner to the
Wi-Fi: you will not be able to carry out scheduled cleaning
without connection and with a low battery.
The robot vacuum cleaner will map and calculate a new route
after running in Spot cleaning mode or after changing its starting
position.
If the self-emptying base is too far away from the robot vacuum
cleaner, the latter won't be able to return to the base. Manually
move the robot vacuum cleaner close to the self-emptying base.

Publicidad

loading