Publicidad
Idiomas disponibles
Idiomas disponibles
Set Countdown Timer
The Light Controller offers a countdown timer function for your pool and spa light(s). When activated,
the lights will stay on for a predetermined amount of time set by the user, then turn off automatically.
To set the countdown timer, refer to the following procedure. When selecting the duration, note that
each lit LED represents 1 hour. The total number of LEDs that are lit = the total duration in hours. The
lights will automatically turn off at the end of the countdown duration.
The example below shows that the lights will stay on for 2 hours and then automatically shut off. Note
that the default countdown timer is 2 hours.
1
2
3
4
Rotate CENTER
Push the
Wait until all
Briefly push the
KNOB to select
SCHEDULE
LEDs stop
CENTER KNOB to
desired color or
button
blinking
save
show
6
5
Briefly push
Select the number
the ENTER/
of hours (each lit
BRIGHTNESS
LED = 1 hour)
button to save
The Light Controller will indicate that a new countdown timer has been set by blinking LED 5 (see
LED Indicator Codes on page 10) and then revert to Show/Color mode.
7
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Publicidad
