LG DLE4801W Manual Del Propietário página 31

HOWTOUSE 31
Cycle setting buttons
SENSOR DRY cycles have preset settings that are selected
automatically. MANUAL DRY cycles have default settings, but you
may also customize the settings using the cycle setting buttons.
Press the button for that option to view and select other settings.
@ NOTE
To protect your garments, not every dryness level, temperature,
or option isavailable with every cycle. See the CycleGuide for
details.
DRYLEVEL
Selects the level of dryness for the cycle. Press the DRY LEVEL
button repeatedly to scroll through available settings.
,This option is only available with SENSOR DRY cycles.
, The dryer will automatically adjust the cycle time. Selecting
MORE DRY or VERY DRY will increase the cycle time, while LESS
DRY or DAMP DRY will decrease the cycle time.
, Use a LESS DRY or DAMP DRY setting for items that you wish to
iron.
TEMP.
Adjusts the temperature setting from ULTRA LOW to HIGH. This
allows precise care of your fabrics and garments. Press the TEMP.
button repeatedly to scroll through available settings.
TIME DRY
Allows you to manually select the drying time, from 20 to 60
minutes, in 1O-minute increments. Use this for small loads or to
remove wrinkles. Use the MORE TIME/LESS TIME buttons to add or
reduce the drying time in 1-minute increments.
Your dryer features several additional cycle options to customize
cycles to meet your individual needs. Certain option buttons also
feature a special function (see the following page for details) that
can be activated by pressing and holding that option button for 3
seconds.
To Add Cycle Options to a Cycle:
1. Turn on the dryer and press the cycle selector buttons to select
the desired cycle.
2. Use the cycle settings buttons to adjust the settings for that
cycle.
3. Press the cycle option button(s) for the option you would like to
add. A confirmation message will be shown in the display.
4. Press the START/PAUSE button to start the cycle. The dryer will
start automatically.
WRINKLE CARE
Selecting this option will tumble the load periodically for up to
3 hours after the selected cycle, or until the door is opened. This
is helpful in preventing wrinkles when you are unable to remove
items from the dryer immediately.
SIGNAL
Adjusts the volume of the Signal or turns offthe Signal.Press the
button repeatedly until the desired volume setting is illuminated.
Special functions
The option buttons also activate special functions, including
CHILD LOCK.
Press and hold the option button marked with the special
function
CHILD LOCK
Use this option to prevent unwanted use of the dryer or to keep
cycle settings from being changed while the dryer is operating.
Press and hold the SIGNAL button for 3 seconds to activate or
deactivate the CHILD LOCK function.
The CHILD LOCK icon will be shown in the display, and all controls
are disabled except the POWER button.
@ NOTE
Once set, CHILD LOCK remains active until it is manually
deactivated. CHILD LOCK must be turned offto run another cycle.
To deactivate CHILD LOCK, press and hold the SIGNAL button for
three seconds.
Custom program
If you have a special combination of settings that you use
frequently, you can save these settings as a CUSTOM PROGRAM.
To Save a Custom Program:
1 .Turn on the dryer and press the cycle selector buttons to select
the desired cycle.
2. Use the cycle setting buttons to adjust the settings for that
cycle.
3. Press the cycle option button(s) for the option you would like to
add. A confirmation message will be shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3 seconds.
i@ NOTE
ou may save only one custom program at a time. Pressing
nd holding the CUSTOM PROGRAM button will overwrite any
reviously saved custom program.
To Recall a Custom Program:
1 .Turn on the dryer.
2. Press the CUSTOM PROGRAM button to select the saved cycle
3. Press the START/PAUSE button to start the cycle.