Publicidad
Idiomas disponibles
Idiomas disponibles
32
MAgNTENANCE
MAINTENANCE
Regular
cleaning
AWARNING
To reduce the risk of fire, electric
shock, or personal injury when
using this appliance,
follow basic precautions,
including
the
following:
. Unplug
the dryer before
cleaning
to avoid the risk of electric
shock.
Failure to follow this warning
can cause serious injury,
fire, electrical
shock, or death.
. Never use harsh chemicals,
abrasive
cleaners, or solvents
to
clean the washer.
They will damage the finish.
Cleaning
the Exterior
Proper care of your dryer can extend its life.
The outside
of the machine
can be cleaned with warm water and
a mild, nonabrasive
household detergent.
immediately
wipe offany
spills with a soft, damp cloth.
@NOTE
Do not use methylated
spirits, solvents,
or similar products.
Never use steel wool or abrasive cleansers; they can damage
the
surface.
Cleaning the Lint Filter
Always clean the lint filter after every cycle.
!
Lint Filter
To clean, open the dryer door and pull the lint filter straight up.
Then:
1. Roll any lint off the filter with your fingers, or
Cleaning
the Interior
Wipe around the door opening
and seal with a soft, damp cloth to
prevent
lint and dust buildup
that could damage the door seal.
Clean the window
with a soft cloth dampened
with warm water
and a mild, nonabrasive
household
detergent;
then wipe dry.
The stainless steel drum can be cleaned with a conventional
stainless steel cleaner, used according
to the manufacturer's
specifications.
Never use steel wool or abrasive cleansers; they can scratch or
damage
the surface.
Cleaning Around
and Under the Dryer
Vacuum lint and dust from around the dryer and underneath
it regularly.Vent
ductwork
should be checked for lint buildup
and cleaned at least once per year. If any noticeable
reduction
in airflow
or drying
performance
occurs, immediately
check
ductwork
for obstructions
and blockages.
Maintaining
Ductwork
Vent ductwork
should
be checked
for lint buildup
and cleaned
at least once per year. If any noticeable
reduction
in airflow
or
drying
performance
occurs, immediately
check ductwork
for
obstructions
and blockages.
Contact a qualified
technician
or
service provider.
2. Vacuum the lint filter, or
3. If the lint filter has become very dirty or clogged
with fabric
softener, wash the lint filter in warm, soapy water and allow to
dry thoroughly
before reinstalling.
@NOTE
NEVER operate the dryer without
the lint filter in place. NEVER
operate the dryer with a wet lint filter.
Publicidad
