Publicidad
Idiomas disponibles
Idiomas disponibles
The following illustrations in Fig. 2a show how to charge the battery
packs via the docks:
1. Push the collar of the hub connector onto the dock until you hear a click as shown
in Fig. 2a (step a).
2a
Hub
a
NOTE:
To disconnect the hub from the
dock, first rotate the collar of the hub
connector according to rotation arrow
marked on the connector and pull it out
from the dock as shown in Fig. 2b.
2. Connect the dock to the next dock
in the same way. You can continue
to connect more docks if necessary
(step b). Do not connect more than
30 docks.
3. Plug the hub into the power supply (step c). The hub status indicator and dock-
status indicator will glow green, indicating that the hub and the dock are working
properly and can charge the battery packs.
4. Align the raised ribs of a battery pack with the mounting slot in one of the dock's
battery bays. Slide the battery pack(s) down into the battery bay (step d). The
battery release button will spring up indicating that the battery pack is securely
attached.
PGX
COMMERCIAL CHARGING 3-PORT DOCK — PGX3000D/PGX3000D-FC
™
c
d
Dock
a
b
2b
≤30
b
a
9
Publicidad
