Tabla de contenido
Publicidad
Foot Board Control Panel Guide (Continued)
LED Display Panel Guide
The LED DIsplay Panel is located at the foot end of the bed, below the Control Panel.
• "POWER" - will light when the bed is plugged into the wall receptacle or the battery power switch is on. Will blink
if the 9V Nurse Call battery needs to be replaced.
• "BED MOTION LOCKED" - will light when the Bed Motion Lock has been activated.
Function Lockout System Usage
1.
To lock out all bed motion switches on the bed, press the "ON/OFF" switch in the "Siderail Control Lockouts"
module. The padlock" symbol on the control panel will be lighted when that function is locked out.
2.
To lock out the bed movement functions on the siderails and prevent the patient from changing the positioning of
the bed, press the "BACK" or "KNEE" switch in the "Siderail Control Lockouts" module. The "padlock" symbol on
the control panel will be lighted when that function is locked out.
3.
To lock out the bed up/down motion on the siderails, press the Up/Down switch in the "Siderail Control Lockouts"
module. The "padlock" symbol on the control panel will be lighted when that function is locked out.
CAUTION
The lockout buttons on the foot board lock the Fowler, Gatch and Bed Up/Down functions and prevent motion of the
bed. It is the responsibility of attending medical personnel to determine whether these functions should be locked and
to use the buttons accordingly.
Return To Table of Contents
2-22
Foot Board Operation Guide
2031-009-011 REV B
www.stryker.com
Publicidad
Capítulos
Tabla de contenido
