Dexter 500HD2.5 Instrucciones Originales página 75

- Damage to eyes from flying dust and debris particles – Always wear suitable eye protection.
- Injury caused by vibration – Hold the tool by designated handles and limit exposure to vibration. See "RISK
REDUCTION".
- Injury caused by dust – Dust created by operating the product can cause respiratory injury. wear an
appropriate dust control mask with filters suitable for protecting against particles from the material being
worked on.
RISK REDUCTION
WARNING: the vibration emission and noise emissions during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used, especially what kind of work piece is
processed; Identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when thetool is
switched off and when it is running idle in addition to the trigger time). Depending on the actual use of the product
the vibration values can differ from the declared total! Adopt proper measures to protect yourself against vibration
exposures! Take the whole work process including times the product is running under no load or switched into
consideration! Proper measures include among others regular maintenance and care of the product and application
tools, keeping hands warm, periodical breaks and proper planning of work processes !
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. Helping to minimise your
vibration and noise exposure risk :
- Always use sharp chisels, drills and blades.
- Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
- If the tool is to be used regularly then invest in anti vibration and noise accessories.
- Plan your work schedule to spread any high vibration tool use across a number of days.
It's recommended to wear ear protection during operation with this machine.
EN - 75