Kenwood TK-250 Manual De Instrucciones página 14

mn
Automatic Number Identification (ANI)
The Automatic Number Identification function
automatically sends a pre-programmed identifier as
explained below. This ANI number is stored in the
ANI memory and can only be modified by the Field
Programming Unit; the number cannot be changed
using the transceiver.
The dealer has programmed 1 of the Connect ANI
methods and 1 of the Disconnect ANI methods
shown below:
Connect ANI
Method User's Procedure
1 Press PTT.
2 Press | *]]%*1.
3 Hold PTT + | *||*
Disconnect ANI
User's Procedure
| Release PTT.
2 Press |x|] #].
3 Hold PTT + |x|} #1].
If the transceiver is programmed for a 16-key
keypad by the dealer, pressing the A, B, C, or D key
will generate its respective tone. However, the Auto
Dialer cannot be used in this case.
12-key Keypad 16-key Keypad
DTMF Tone| Press DTMF Tone| Press
A
A||2
A
A
B
A||5
B
B
C
Alls
C
Cc
D Aj;
0
D D