Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Before connecting the power cord, place the machine upright for 24 hours to allow the
refrigerant to settle. Unpack all packaging materials: foam, bags, tape, etc.
● Place the machine on a stable and level surface to support its weight.
● This machine can be installed without any support, in a suitable place with a power
supply.
● Keep the machine in well ventilated areas with a temperature between 50-100℉(10-
37℃). Do not install or use this machine in a closed room.
● Keep this machine away from wind, rain, water mist and electromagnetic environments.
● Keep this machine away from heat sources, such as ovens and grills.
● Only use filtered or purified water. To clean the outside of the machine and remove dust
from the bottom, use citric acid every other week.
Control panel
A
A---Ice making indicator
B--- Add water indicator
C---Ice full indicator
D---Power button
Operation
When using for the first time (or not used for a long time), discard the ice cubes made in
the first four cycles, ensuring the machine is thoroughly cleaned.
1. Connect the power cord to a grounded three-hole outlet.
2. Open the front cover, take out the ice basket, then pour the drinkable water into the
tank (do not exceed the maximum level mark).
3. Insert the ice basket (the water level is underneath the ice basket) and close the cover.
4. Press
- the 'Big Ice' indicator will be on continuously. When the light stops flashing,
the machine will start working.
Tips:
When the ice box is full, the 'ice full' indicator on the display panel will light up (red) – the
machine will stop automatically. When the ice is removed, the machine will start working.
If water is insufficient, the 'add water' indicator lights up (red) and the machine will stop
working. After refilling, press
B
to restart.
C
D
Publicidad
