IKEA TRIXIG P2202 Instrucciones Originales página 8

hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of
the tool in unexpected situations.
Battery tool use and care
a. Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
b. Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c. When battery pack is not in use, keep it away from other metal objects, like
paperclips, coins, keys, nails, screws or other small metal objects that can make
a connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
d. Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause irritation
or burns.
e. Do not use a battery pack or tool that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behaviour, resulting in fire, explosion or
risk of injury.
f. Do not expose a battery pack or tool to fire or excessive temperatures. Exposure to
fire or a temperature above 130 °C may cause an explosion.
g. Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specified in the instructions. Charging improperly
or at temperatures outside the specified range may damage the battery and increase
the risk of fire.
Service
a. Have your power tool serviced by a qualified repair person using only identical
replacements parts.This will ensure that the safety of the power tool is maintained.
b. Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorised service providers.
MACHINE-SPECIFIC SAFETY INSTRUCTION
Safety warnings for drills and screwdrivers
1. Safety instructions for all operations
a. Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
b. Hold the power tool by the insulated gripping surfaces when performing an
operation where the cutting accessory or fasteners may contact hidden wiring.
The cutting accessory or fasteners contacting a "live" wire may make exposed metal
parts of the power tool conductive and could give the operator an electric shock.
2. Safety instructions when using long drill bits
a. Never operate at a higher speed than the maximum speed rating of the drill bit.
At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
b. Always start drilling at low speed and with the bit tip in contact with the
8