Descargar Imprimir esta página

IKEA TRIXIG P2202 Instrucciones Originales página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
c. Apply pressure only in direct line with the bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of control, resulting in personal injury.
Use appropriate detectors to determine if utility lines are hidden in the work area
or call your local utility company for assistance.
Contact with electric lines can lead to fire and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line causes property damage or may cause an
electric shock.
Switch off the power tool immediately when the tool becomes blocked or stuck. Be
prepared for high reaction torque that can cause kickback. The tool becomes blocked
when:
• the power tool is subjected to overload
• or it becomes wedged in the workpiece.
Hold the machine with a firm grip. High reaction torque can briefly occur while driving
in and loosening screws.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of materials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to a complete stop before placing it down.
The tool insert can jam and lead to loss of control over the power tool.
Avoid unintentional switching on. Ensure the trigger is in the off position before
inserting battery pack. Carrying the power tool with your finger on the trigger or
inserting the battery pack into power tools that have the switch on invites accidents.
Safety Warnings for battery chargers
For indoor use only.
Keep the battery charger away from rain or moisture. Penetration of water in the
battery charger increases the risk of an electric shock.
Do not charge other batteries. The battery charger is suitable only for charging the
batteries that were supplied with your power tool. Otherwise there is danger of fire and
explosion.
Keep the battery charger clean. Contamination can lead to danger of an electric shock.
Before each use, check the battery charger, cable and plug. If damage is detected,
do not use the battery charger. Never open the battery charger yourself. Have
repairs performed only by a qualified technician. Damaged battery chargers, cables
and plugs increase the risk of an electric shock.
9

Publicidad

loading

Este manual también es adecuado para:

Trixig