YASKAWA LA500 Manual De Instrucciones página 13

■
Intended Use
The drive is a commercial-use electrical device that controls the speed and rotation direction of a
motor. Do not use the drive for any other purpose.
1. Carefully read the technical manual.
2. Read all safety precautions before you install, wire, or operate the drive.
3. When you install the drive, wire and ground it according to all applicable standards and
safety precautions.
4. Make sure that you correctly install all components and protection covers.
5. Be sure to use the drive in the specified environmental conditions.
WARNING
Electrical Shock Hazard. Do not modify the drive body or drive circuitry. Modifications to
drive body and circuitry can cause serious injury or death, will cause damage to the drive, and will void the
warranty. Yaskawa is not responsible for modifications of the product made by the user.
■
Exclusion of Liability
• This product is not designed and manufactured for use in life-support machines or systems.
• Contact a Yaskawa representative or your Yaskawa sales representative if you are considering
the application of this product for special purposes, such as machines or systems used for
passenger cars, medicine, airplanes and aerospace, nuclear power, electric power, or undersea
relaying.
■
Warning Label Content and Location
The drive warning label is in the location shown in
information. Replace unreadable or missing labels.
A - Warning label "Hot surface"
B - Nameplate
The labels show the following content:
YASKAWA TOMPYEULA5001C LA500 Installation and Operation Instructions
Figure 1.1 Warning Label Content and Location
Figure 1.2 Warning Label "Hot surface"
Figure 1.1. Use the drive as specified by this
C - Warning label "Risk of electric shock"
D - Warning label "Application"
1 English
13